Thermal Round Pipe Duct to Fitting Connectors

SKU : SST-125-DFCON

Overview

Verplas Thermal Round Pipe Duct to Fitting Connector (Click and Lock Mechanism)

€3,43 EUR Excl. VAT: €2,86 EUR

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Verplas Thermal Round Pipe Duct to Fitting Connector (Click and Lock Mechanism)

Product Part Number:

125mm Thermal Connector - SST-125-DFCON
160mm Thermal Connector - SST-160-DFCON

Duct connector designed with thermal resistance in mind
Exceeds thermal resistance compliance tests
Features rapid self-seal technology for faster ventilation system installation
Exceeds DW/143 Class A leakage test for low leakage performance

Available Sizes:

125mm
160mm

Video

Frequently Asked Questions

What is thermal ductwork used for?

Thermal ductwork is used in ventilation systems where an insulated duct run is required. It can help reduce heat loss and lower the risk of condensation in suitable duct routes.
Where is thermal ductwork commonly installed?

Thermal ductwork is commonly used in areas where ducting may pass through colder spaces, such as lofts, roof spaces, ceiling voids or unheated areas, depending on the ventilation design.
Does insulated ducting prevent condensation inside the duct?

Correctly specified insulation can significantly reduce the risk of condensation by limiting temperature differences between the duct surface and surrounding air.
Is thermal ducting a building regulation requirement?

Insulation requirements depend on the duct location, system and applicable Building Regulations. Ductwork passing through unheated spaces commonly requires suitable insulation.
Do I still need thermal ducting if the loft itself is well insulated?

Potentially, yes. If the ductwork is outside the insulated building envelope or carries air at a significantly different temperature, additional duct insulation may still be required.