Vent Axia Kinetic F R/H – 6 Room Complete MVHR Kit

SKU : KIT-MVHR-408167-06

€3.106,47 EUR Excl. VAT: €2.588,73 EUR

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Vent Axia Kinetic F R/H – 6 Room Complete MVHR Kit

This complete whole-house MVHR package is generated from BPC's current ventilation design and material-list logic around the exact Vent Axia Kinetic F R/H (125mm 325m3/h @ 100Pa) (408167). It is intended as a ready-to-buy reference kit for a representative 6-room home of approximately 100 m².

Reference design

Reference room mix: 2 bedroom(s), 1 living room(s), 0 other habitable room(s), 1 kitchen(s), 1 bathroom(s), 0 utility room(s) and 1 WC(s)
Calculated reference airflow: 108.0 m³/h
Selected unit design capacity used by BPC: 211.2 m³/h
Manufacturer maximum airflow stored in the design catalogue: 325.0 m³/h
125mm main duct configuration with radial room distribution
Manufacturer: Vent-Axia
The unit, controls and ducting accessories below are generated by the same BOM engine used in the BPC design workflow.

Unit variant

Right-hand unit configuration

Important sizing note: this is a preset reference package, not a substitute for a project-specific ventilation design. Floor area, occupancy, bedrooms, wet rooms, duct routes and installation constraints can change the required airflow and material quantities. If your property differs materially from the reference configuration, send BPC your plans for a design check before ordering.

What's included

SKU	Item	Qty
QV-125AVP-S	125mm - Quiet-Vent supply air valve PVC (white)	3
QV-125AVP-E	125mm - Quiet-Vent extract air valve PVC (white)	3
P125-2	125mm - PVC Pipework x 2 metre	4
C125	125mm - PVC Pipe connector	3
B90125	125mm - PVC 90º bends	10
R150125P	PVC reducer 150mm (FM) - 125mm (M)	1
QV125F-SILENCER	Quiet-Vent 125mm x 500mm - Flexi insulated sound attenuator	2
INS25	QV 25mm - 1m Foil Back Glass Fibre Insulation (1.2m x 1 m)	4
QV-SSC125M	125mm Wall Cowl	2
QVRC125	Quiet-Vent 125mm Rubber flexible circular duct connector & 2 x clips	4
BS50	Builders Strap Roll (10m /12*0.8cm)	2
ST75	75mm - Roll Silver Foil Tape (45 meters, 30 Microns)	2
DASEAL	Sealant - PVC Duct 310ml White	1
QV75P-HP	QV 75mm - 50 Metre Antibacterial Radial pipe (use QV rings)	2
QV75-PLEN	Quiet-Vent 75mm Plenum	6
QV-75SR	Quiet-Vent 75mm - Standard Sealing Ring (pack of 10)	2
QV75-04125MTE	Quiet-Vent 4 Pt Adjustable Top Entry Distribution box -125 spigot (75mm)	1
QV75-06150TE	Quiet-Vent 6 Pt Top Entry Distribution box -150 spigot (75mm) with 2 x blanking caps	1
408167	Vent Axia Kinetic F R/H (125mm 325m3/h @ 100Pa)	1
443283C	Vent Axia Digital controller - hard wired (Sentinel Kinetic Only)	1

Frequently Asked Questions

What is a single room MVHR unit?

A single room MVHR unit is a compact heat recovery ventilation unit designed to ventilate one room or a specific area. It helps extract stale air while bringing in fresh air and recovering heat from the outgoing air.
Where can single room MVHR units be used?

Single room MVHR units are often used in retrofit projects, apartments, extensions, bedrooms, living spaces and other areas where targeted ventilation is required.
Do single room MVHR units need ductwork?

Most single room MVHR units do not require a full ductwork system. They are usually installed through an external wall, although installation requirements vary by product.
How noisy are single room MVHR units?

Noise levels vary by model and operating speed. Correct sizing and installation help keep operating noise low, particularly when the unit can run at lower background speeds.
Can multiple single room MVHR units be linked together in one property?

Some single-room MVHR systems support paired or synchronised operation, while others operate independently. Always check the compatibility and control options of the specific model.