BPC Standard 6 Room MVHR Kit – Airflow Adroit DV96 EPH L with Integral CO2 Sensor

BPC 6-Room Standard MVHR Kit

A great, cost-effective choice for your MVHR project. Bring fresher air and everyday comfort into your home with a ventilation package from BPC. Combining the Airflow Adroit DV96 EPH L with Integral CO2 Sensor with the VS ducting range, this kit brings the core components together in one convenient package — making it easier to plan your project and buy with confidence.

Fresh air. Heat recovery. Practical value.

MVHR supplies fresh air to living spaces and bedrooms while extracting stale, moisture-laden air from wet rooms. Heat recovery transfers warmth from the outgoing air to the incoming supply, helping you ventilate your home while reducing the heat lost through ventilation.

Our kits pair your selected MVHR unit with the VS ducting range for a practical, cost-effective route to a whole-home system. Spend less time putting together a shopping list and more time moving your project forward, with the included components and quantities clearly listed below.

Why choose a BPC kit?

• Value at the heart of the package: a selected MVHR unit paired with the VS ducting range.
• A more comfortable home: continuous fresh-air supply and extraction of stale air.
• Convenient to buy: the core ventilation components brought together in one package.
• Clear about what is included: an itemised component list to help you plan your installation.

This kit is based on a reference 6-room project of around 100 m². Check the specification against your home's layout before ordering.

Built around the VS ducting range

• VS 75mm radial ducting: flexible ducting for routing fresh and extract air around your home.
• VS distribution boxes: 6-port supply box (VS75-06125RE) and 6-port extract box (VS75-06125RE).
• VS dual plenums: connect the radial ducting to your room valves.
• VS sealing rings: included for the specified radial duct connections.
• Two VS silencers: help reduce duct-borne noise for a quieter ventilation system.
• Main ductwork and room valves: pipe, rigid fittings, terminals and valves as listed below.

Exactly what you receive

The following list is the kit specification, including quantities for each component.

Rubber flexible connectors, jubilee clips, fixings, tape and sealant are not included. The ductwork is specified for direct connections using the listed rigid fittings and silencers.

Your selected MVHR unit

Airflow Adroit DV96 EPH L with Integral CO2 Sensor (90001266EPH).

• Up to 90% heat recovery efficiency
• Integral CO₂ and humidity sensing for demand-controlled ventilation
• Heater-equipped EPH model with Smart Frost Protection
• Smartphone, tablet or PC connectivity
• Triple filtration including an F7 / ePM1 supply-air filter
• 100% automatic summer bypass

• Integral CO₂ sensing

Planning your project

The 6-room and 100 m² figures describe the reference layout used to build this kit. Your room uses, required airflows and duct routes determine the final specification. Contact BPC if you need help checking the component list against your project.

Make your next project a BPC project

Choose a practical MVHR package with value, fresh air and comfort at its heart. Review the included components, or contact BPC for help finding the right kit for your home.

Send your plans for a free ventilation estimate.