1 1

S&P Silent 100 CHZ Wall Fan - Humidity / Timer / Indicator / Shutte - Rated 26l/s

S&P Silent 100 CHZ Wall Fan - Humidity / Timer / Indicator / Shutte - Rated 26l/s

SKU : SILENT-100-CHZ

Overview

The S&P SILENT-100 CHZ is a quiet-running 100mm axial extract fan designed to remove humid, stale air from bathrooms, toilets, en-suites and other small domestic spaces. It is suitable for wall or ceiling mounting and connects to standard 100mm circular ducting.
€122,85 EUR Excl. VAT: €102,38 EUR

Low stock
  • For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Download Files

View full details

Description

Product Part Number

SILENT-100-CHZ

Product Overview

The S&P SILENT-100 CHZ is a quiet-running 100mm axial extract fan designed to remove humid, stale air from bathrooms, toilets, en-suites and other small domestic spaces. It is suitable for wall or ceiling mounting and connects to standard 100mm circular ducting.

An integrated electronic humidistat automatically activates the fan when the relative humidity rises above the selected level. The humidity setting can be adjusted between 60% and 90% RH, helping the fan respond automatically to moisture generated through showering, bathing and other everyday activities.

The adjustable run-on timer allows the fan to continue operating after the humidity has fallen below the selected level or after the connected switch has been turned off. This helps remove remaining moisture and odours from the room.

The motor is mounted on specially designed silent elastic blocks that absorb vibration and reduce the transmission of noise into the surrounding wall or ceiling. The fan also includes an operation indicator and automatic back-draught shutter, which helps prevent outside air from entering when the fan is switched off.

Technical Specification

Manufacturer: Soler & Palau

Product Range: SILENT

Fan Type: Low-noise axial extract fan

Application: Bathrooms, toilets, en-suites and other small domestic spaces

Installation: Suitable for wall or ceiling mounting

Duct Connection: 100mm diameter

Maximum Airflow: 95m³/h

Maximum Airflow: Approximately 26.4l/s

Listed Rated Airflow: 26l/s

Fan Speed: 2,400rpm

Maximum Power Consumption: 8W

Supply Voltage: 230V

Frequency: 50Hz

Sound Pressure Level: 26.5dB(A) at 3 metres under free-air conditions

Humidity Sensor: Adjustable electronic humidistat

Humidity Adjustment Range: 60–90% RH

Run-On Timer: Yes

Timer Adjustment Range: Approximately 2–20 minutes

Operation Indicator: Pilot light

Back-Draught Shutter: Automatic back-draught shutter

PIR Movement Sensor: No

Motor Bearings: Long-life ball bearings

Motor Mounting: Vibration-absorbing silent elastic blocks

Motor Protection: Thermal overload protection

Electrical Insulation: Class II

IP Rating: IP45

Maximum Air Temperature: 40°C

Housing Material: Injection-moulded plastic

Colour: White

Front Dimensions: 158mm × 158mm

Overall Depth: 109.3mm

Rear Casing Depth: Approximately 84.6mm

Installation Depth: 79mm

Spigot Diameter: 98.9mm

Weight: Approximately 0.57kg

Frequently Asked Questions

  • What is an extractor fan used for?

    An extractor fan removes humid, stale or polluted air from a room. They are commonly used in bathrooms, kitchens, utility rooms and other areas where moisture, odours or poor airflow can build up.

  • What extractor fan do I need for a bathroom?

    The right bathroom extractor fan depends on the room size, installation location, duct route and control type required. Timer, humidity and low-carbon options are available depending on the project.

  • Can extractor fans help with condensation?

    Yes, extractor fans can help reduce condensation by removing humid air from wet rooms. However, condensation can also be affected by insulation, heating, airflow and overall ventilation.

  • What is a D-MEV fan?

    A D-MEV fan is a decentralised mechanical extract ventilation fan. It usually runs continuously at a low rate, with boost options when more extraction is needed.

  • What is the difference between an extractor fan and an inline fan?

    A standard extractor fan is usually mounted on a wall, window or ceiling. An inline fan is installed within the duct run, often in a loft or ceiling void, and can be useful where a longer duct route is needed.