• verplas-thermal-round-t-piece-bpc-ventilation
1 1

Thermal Round Pipe T-Piece

Thermal Round Pipe T-Piece

SKU : SST-125-TP-IND

Overview

Self-Seal Thermal T Piece (Complete with Click and Lock Fittings)
€56,06 EUR Excl. VAT: €46,72 EUR

In Stock
  • For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.
View full details

Description

Self-Seal Thermal T Piece (Complete with Click and Lock Fittings)

Product Part Number:

125mm Thermal T-Piece - SST-125-TP-IND
160mm Thermal T-Piece - SST-160-TP-IND

Manufactured from Neopor® graphite impregnated expanded polystyrene (EPS) with infrared absorbers and reflectors
Significantly improves thermal resistance compared to standard EPS
Thermal Conductivity: 0.03 W/mK, achieving a Thermal Resistance (R) of 0.666 m²K/W at 20mm thickness
Exceeds UK Domestic Ventilation Regulation requirements for thermal resistance
Flame Retardant to DIN 4102 B1
Meets BASF – EN13163 for thermal conductivity to assist in condensation prevention
Density: 25 kg/m³, ensuring superior insulation performance

Please Note:

Can be damaged if stood on or if heavy weight is applied.

Available Sizes:

125mm
160mm


Video

Frequently Asked Questions

  • What is thermal ductwork used for?

    Thermal ductwork is used in ventilation systems where an insulated duct run is required. It can help reduce heat loss and lower the risk of condensation in suitable duct routes.

  • Where is thermal ductwork commonly installed?

    Thermal ductwork is commonly used in areas where ducting may pass through colder spaces, such as lofts, roof spaces, ceiling voids or unheated areas, depending on the ventilation design.

  • Does insulated ducting prevent condensation inside the duct?

    Correctly specified insulation can significantly reduce the risk of condensation by limiting temperature differences between the duct surface and surrounding air.

  • Is thermal ducting a building regulation requirement?

    Insulation requirements depend on the duct location, system and applicable Building Regulations. Ductwork passing through unheated spaces commonly requires suitable insulation.

  • Do I still need thermal ducting if the loft itself is well insulated?

    Potentially, yes. If the ductwork is outside the insulated building envelope or carries air at a significantly different temperature, additional duct insulation may still be required.

BPC Ventilation · Free project support

Not sure which ventilation system you need?

Send us your floor plans for a free ventilation estimate and residential layout guide. Our team will review your project and help you choose suitable MVHR or MEV equipment for your property and budget.

  • Free estimate & layout guide
  • Independent advice across brands
  • Lifetime technical support with every system sold
Send plans for a free estimate

Upload your drawings and project details to get started.

Free residential layout guides cover airflow requirements and unit and valve location guidance. Full ducting route planning is a separate service. Layout guides are not available for commercial projects.