Thermal Round Pipe 90Âº Bend

SKU : SST-125-90B-IND

Overview

Verplas Thermal Round Pipe 90º Bend

€42,12 EUR Excl. VAT: €35,10 EUR

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Verplas Thermal Round Pipe 90º Bend

Product Part Number:

125mm 90º Round Bend - SST-125-90B-IND
160mm 90º Round Bend - SST-160-90B-IND

The Self-Seal Thermal 90° Bend comes with a click and lock fitting system for easier installation
Neopor®: Graphite-impregnated expanded polystyrene (EPS) with infrared absorbers and reflectors, improving thermal resistance compared to standard EPS

Meets the thermal conductivity requirements of BASF – EN13163 to help prevent condensation
Flame retardant to DIN 4102 B1
Thermal Ducting has a minimum density of 25 kg/m³, achieving a thermal conductivity of 0.03 W/mK
Provides a Thermal Resistance (R value) of 0.666 m²K/W at 20mm thickness
Exceeds UK Domestic Ventilation Regulation requirements of Part F 2010 and NHBC Guidance Document Chapter 3.2
Ideal for preventing condensation in ventilation systems
Note: The pipe may be damaged if stood on or subjected to heavy weight

Available Sizes:

125mm
160mm

Video

Frequently Asked Questions

What is thermal ductwork used for?

Thermal ductwork is used in ventilation systems where an insulated duct run is required. It can help reduce heat loss and lower the risk of condensation in suitable duct routes.
Where is thermal ductwork commonly installed?

Thermal ductwork is commonly used in areas where ducting may pass through colder spaces, such as lofts, roof spaces, ceiling voids or unheated areas, depending on the ventilation design.
Does insulated ducting prevent condensation inside the duct?

Correctly specified insulation can significantly reduce the risk of condensation by limiting temperature differences between the duct surface and surrounding air.
Is thermal ducting a building regulation requirement?

Insulation requirements depend on the duct location, system and applicable Building Regulations. Ductwork passing through unheated spaces commonly requires suitable insulation.
Do I still need thermal ducting if the loft itself is well insulated?

Potentially, yes. If the ductwork is outside the insulated building envelope or carries air at a significantly different temperature, additional duct insulation may still be required.

BPC Ventilation · Free project support

Not sure which ventilation system you need?

Send us your floor plans for a free ventilation estimate and residential layout guide. Our team will review your project and help you choose suitable MVHR or MEV equipment for your property and budget.

Free estimate & layout guide
Independent advice across brands
Lifetime technical support with every system sold

Send plans for a free estimate

Upload your drawings and project details to get started.

Free residential layout guides cover airflow requirements and unit and valve location guidance. Full ducting route planning is a separate service. Layout guides are not available for commercial projects.