Thermal Round Pipe

SKU : SST-125-1M-IND

Overview

Self-Seal Thermal Pipe Complete with 1 Click and Lock Duct to Duct Fitting

€35,38 EUR Excl. VAT: €29,48 EUR

For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.

Any questions? Reach out to our team

View full details

Description

Self-Seal Thermal Pipe Complete with 1 Click and Lock Duct to Duct Fitting

Product Part Number:

1 Meter Thermal Pipe - SST-125-1M-IND
1 Meter Thermal Pipe - SST-160-1M-IND

Note: Orders below 20 meters may only be supplied in one-meter lengths (excluding complete orders over £500)

The Verplas Self-Seal Thermal Pipe is made from Neopor® graphite-impregnated expanded polystyrene (EPS)
Infrared absorbers and reflectors enhance the thermal resistance compared to standard EPS
Thermal Conductivity Compliance: Meets the requirements of BASF – EN13163 for condensation prevention
Flame Retardant to DIN 4102 B1

Thermal Performance:

Density: Minimum 25 kg/m³
Thermal Conductivity: 0.03 W/mK
Thermal Resistance (R value): 0.666 m²K/W at 20mm thickness
Exceeds Part F 2010 Domestic Ventilation Compliance Guide and NHBC Guidance
Important: Pipe may be damaged if stood on or subjected to heavy weight

Available Sizes:

125mm
160mm

Video

Frequently Asked Questions

What is thermal ductwork used for?

Thermal ductwork is used in ventilation systems where an insulated duct run is required. It can help reduce heat loss and lower the risk of condensation in suitable duct routes.
Where is thermal ductwork commonly installed?

Thermal ductwork is commonly used in areas where ducting may pass through colder spaces, such as lofts, roof spaces, ceiling voids or unheated areas, depending on the ventilation design.
Does insulated ducting prevent condensation inside the duct?

Correctly specified insulation can significantly reduce the risk of condensation by limiting temperature differences between the duct surface and surrounding air.
Is thermal ducting a building regulation requirement?

Insulation requirements depend on the duct location, system and applicable Building Regulations. Ductwork passing through unheated spaces commonly requires suitable insulation.
Do I still need thermal ducting if the loft itself is well insulated?

Potentially, yes. If the ductwork is outside the insulated building envelope or carries air at a significantly different temperature, additional duct insulation may still be required.

BPC Ventilation · Free project support

Not sure which ventilation system you need?

Send us your floor plans for a free ventilation estimate and residential layout guide. Our team will review your project and help you choose suitable MVHR or MEV equipment for your property and budget.

Free estimate & layout guide
Independent advice across brands
Lifetime technical support with every system sold

Send plans for a free estimate

Upload your drawings and project details to get started.

Free residential layout guides cover airflow requirements and unit and valve location guidance. Full ducting route planning is a separate service. Layout guides are not available for commercial projects.