1 1

S&P TD-160/100-NT SILENT Timer In-Line Fan

S&P TD-160/100-NT SILENT Timer In-Line Fan

SKU : TD-160/100-NT SILENT

Overview

The S&P TD-160/100 NT SILENT In-Line Fan is a compact mixed-flow duct fan designed for use with 100mm circular ducting. Delivering an airflow of up to 180m³/h (50l/s), it provides effective ventilation while operating at a low sound pressure level of just 24dB(A) at three metres.
€134,43 EUR Excl. VAT: €112,03 EUR

Out of Stock
  • For warranty information, please refer to the manufacturer’s warranty policy or contact them directly.
View full details

Description

Product Part Number

TD-160/100-NT SILENT

Description

The S&P TD-160/100 NT SILENT In-Line Fan is a compact mixed-flow duct fan designed for use with 100mm circular ducting. Delivering an airflow of up to 180m³/h (50l/s), it provides effective ventilation while operating at a low sound pressure level of just 24dB(A) at three metres.

Designed for installations where noise and available space are important considerations, the fan uses S&P’s floating motor system. The motor is mounted on silent elastic blocks that help absorb vibration and reduce the transfer of operational noise through the fan casing and adjoining ductwork.

An integrated adjustable run-on timer allows the fan to continue operating for between 1 and 30 minutes after the connected switch has been turned off. This helps clear remaining moisture, odours and stale air from the ventilated area. The timer model operates at a single speed and is not suitable for use with an external speed controller.

Its compact construction makes the fan suitable for ceiling voids and other confined installation areas. The Class B motor includes ball bearings and thermal overload protection, while the fan is rated to IP44 for electrical protection.

Technical Specification

Specification Details
Manufacturer Soler & Palau (S&P)
Model TD-160/100 NT SILENT
Manufacturer reference 5211322200
Fan type Ultra-quiet in-line mixed-flow duct fan
Nominal duct diameter 100mm
Connection spigot diameter 97mm
Number of speeds Single speed
Maximum airflow 180m³/h
Maximum airflow 50l/s
Motor speed 2,400rpm
Maximum absorbed power 29W
Maximum absorbed current 0.17A
Sound pressure level 24dB(A) at 3 metres
Timer Adjustable run-on timer
Timer range 1–30 minutes
Electrical supply 230V, single phase, 50Hz
Operating air temperature −20°C to +40°C
Protection rating IP44
Motor insulation class Class B
Motor bearings Ball bearings
Motor protection Safety thermal overload protection
Speed controller compatibility Not suitable
Weight 1.4kg
Overall length 232mm
Maximum body diameter 135.5mm
Maximum overall width 151mm
Noise-reduction system Motor mounted on silent elastic blocks
Mounting Suitable for in-line installation with 100mm ducting

Frequently Asked Questions

  • What is an extractor fan used for?

    An extractor fan removes humid, stale or polluted air from a room. They are commonly used in bathrooms, kitchens, utility rooms and other areas where moisture, odours or poor airflow can build up.

  • What extractor fan do I need for a bathroom?

    The right bathroom extractor fan depends on the room size, installation location, duct route and control type required. Timer, humidity and low-carbon options are available depending on the project.

  • Can extractor fans help with condensation?

    Yes, extractor fans can help reduce condensation by removing humid air from wet rooms. However, condensation can also be affected by insulation, heating, airflow and overall ventilation.

  • What is a D-MEV fan?

    A D-MEV fan is a decentralised mechanical extract ventilation fan. It usually runs continuously at a low rate, with boost options when more extraction is needed.

  • What is the difference between an extractor fan and an inline fan?

    A standard extractor fan is usually mounted on a wall, window or ceiling. An inline fan is installed within the duct run, often in a loft or ceiling void, and can be useful where a longer duct route is needed.