Part no:
0000-4490
DucoBox Silent MEV Unit with Humidity Sensor
The DucoBox silent Uk is a high quality MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system
Demand controlled with an internal humidity sensor that will automatically increase the speed to lower high humidity levels
Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe
With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points
The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet
With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations
BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems
Demand Controlled Ventilation
Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small.
DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system.
DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions:
To only ventilate, when necessary, where it is necessary and as long as it is necessary!
The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again
It is also possible to install a CO2 box sensor inside the DucoBox Silent UK
With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions!
Silent Plus Kit
The Silent Plus Kit provides additional acoustic damping of up to 3 dB(A)!
The kit consists of three acoustic composite foam pads and three acoustic caps that are placed into the predesigned inserts inside the unit
Quiet-Vent adaptors
The Quiet-Vent 125 to 90 adapters allow you to connect the 90mm radial pipe directly to the unit avoiding the use of a distribution box that will provide many benefits over using solid rigid ducting
Up to 7 number 90mm radial ducts can be used on the unit
This option will reduce installation time over solid rigid duct, reduce cost as there is no need for a distribution box, and comply with the latest building control requirements
Fault Indicator
With the optional wall mounted fault indicator, you can be notified by colored indicator light when a fault is detected (max one per unit)
Boost switch
A boost switch will allow the user to manually increase or decrease the speed, there is a manual 2 speed and 3 speed switches available
Only one boost switch is recommended per unit and if the speed is set to high it will override any sensors and remain at that speed till manually reset to a lower speed
A boost switch is required to commission the unit
