BSK Scholar Classroom Heat Recovery Unit
Product Part Number
BSK Scholar 700 - Scholar 700
Description
Highly efficient heat recovery unit specially designed for classrooms, meeting rooms and offices with C02 demand control operation
These units get rid of dust, pollen, spores and other harmful particles to provide 100% fresh filtered air and can either recover up to 95% of normally wasted heat or provide comfort cooling via the free cooling mode
BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems
Key features
- Fully automatic control
- Internal Co2 sensors
- Suitable for offices with up to 24 staff
- Airflow rate 700m3/h
- 160m pipe connections
- Up to 95% heat recovery efficiency.
- Free cooling mode via By-Pass
- Unit mounted digital controller
- Top or rear external pipe spigots
- 100% full and filtered modulating summer bypass
- Internal attenuating silencer
- Air quality pressure sensor
- Triple filter design of G4, G5 and F7 pollen filter
- Double walled construction with 25mm sound insulation
- Anti draft electronic dampers to prevent draft when off
- Filter warning
- BMS integration
Controllability
The BSK Scholar has a unit mounted controller with a passcode that will allow the authorised person to adjust all setting including
- Air flow settings
- temperature,
- Co2 levels
- Weekley programme
- Auto Mode
Internal Co2 Sensors
An internal mounted Co2 will boost the units speed when required
BMS Control
BMS integration is possible through the Modbus port on top of the unit
Boost Input
A boost input is positioned on top of the unit
Installation
Both the Scholar 500/700 can be positioned against an external wall or at an internal wall and ducted to the outside (This method will give a slight decrease in performance due to the longer duct pressure increase, as the units are designed to be used with a short duct run or no ducting.
Construction
The casing is double walled 0.7mm galvanised steel filled with 25mm of sound insulation in order to keep the sound and heat insulation at the highest level. The outside as well as the inside surfaces of our devices are painted with electrostatic powder paint and deliver a long life, while providing a stylish and clean appearance.
Motors
Highly efficient backward curved EC fans for maximum efficiency and performance
Filtration
A total of 3 filters are fitted as standard to supply superior filtration
- 1 x G4 filter to exhaust air to outside
- 1 x G4 pre filter to room air supply
- 1 x F7 post filter to room air supply
Summer By-Pass
The BSK Scholar range of units have a 100% summer by-Pass
Low Noise Levels
With airtight, aerodynamic and sound absorbing construction with perfectly balanced fans the noise levels are ultra quiet
Heat Exchanger
The Highest performing heat recovery exchanger that can recover up to 95% of otherwise lost heat
Frost Protection
The unit has a frost protection programme
Silencer
The BSK Scholar as an internal silencer at the fresh air outlet of our device that allows silent
operation which provides a quiet working environment for classrooms or offices
Orientation
Only one orientation is possible
Construction
Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency
Mounting
The unit is floor mounted
Warranty
BSK offer a 2-year Parts warranty
Further Information
Further information is available on the Manufactures website (Click Here)
